GS-237 can clean the mechanical parts with heavy oil, the dirt that are stuck on the rubber and plastic products and remove the burnt carbides of mineral oil.

Features:
The product has stronger penetrability, high ability to remove the carbon accumulated and is safe for all the metals.
No ignition danger, both safe and reliable, can be used both indoor and outdoor.
The penetrability of GS-237 can rapidly get rid off the grease polluted and carbon accumulated, the internal dirt of tiny and complex parts can ales be cleaned without manual treatment.

Characters:
Appearance: the color specified Smell: Solvent smell
PH value:10.5±0.5 Specific gravity:1.07±0.02
Application: The carbon and heavy oil treatment for the various mechanical parts such as diesel engine, internal combustion engine, valve of air compressors, carburetor, nozzles, piston, gearbox, nozzle of oil-burnt boilers etc.

Application method:
Mix evenly the solution in the bucket and pour out the quantity needed and no need to warm up in the course of washing, put the small parts in the metal cage for soaking and the dirt removing time can be various according to the pollution degree, usually 15minutes to 24 hours. The soaking time can be shortened if the oscillation is made by ultrasonic waves. The parts taken out after soaking should be flushed clean with water under pressure or solution and the GS-237 after use should be sealed with cover for repeat uses.

Notices:
The product is of alkalinity ,wear the gloves when it is in use. The parts of aluminum-magnesium material should be treated in short time.
GS-237 has a special solvent smell, which should be sealed with cover when it is stored after use.

It can freeze in winter and the effect after melting will not change.