The series Activated Carbon are products through particular techniques and scientifically with sawdust as raw material. These Products are full of internal pore and large surface area. Those Pores full meet the molecule distributing of large, medium and small Pigment in Furun Acid solution in order to meet the great absorbability, great decolorizing quick filtration. It is propitious to adsorb all kinds of pigments of Furun Acid solution, corrective admixture. It has advantage in saving cost in SMG and Small pollutant. It can save 30% min cost than ordinary Activated Carbon. It can save man charge, material and cost. It is the best Activated Carbon widely used in decolorzing, refining and de-flavoring. In processing Monosodium Glutamate.

Packing: 20kg/plastic bag inner film
Test standard: national standard of wooden activated carbon GB/T12496-1999

	Transmitt-ancy	Methylene Blue (ml/0.1g)	Moisture (%)	Iron content (%)	Ash(%)	Mesh (200) Through (%)
ZY--110	≥ 95	≥ 12	≤ 30	≤ 0.1	≤ 7	≥ 95
Remark	*The test method of Transmittancy (decoloring furun acid): 1.the confecting of solution of furun acid: weigh up 100g dry furun acid put in 500ml beaker and put into 100ml distilled water and heat up 50C. put in 50% NaOH solution and adjust PH value to 6.5-6.8, beat up it to full solved. Adopt 300ml. 2.test method: weigh up truly 1.500g Activated Carbon (including moisture), put it Into 300ml solution of furun acid,heat up 30 minutes in 60C. and filtrate the Solution by filtrating paper of medium speed, give up 15ml aboriginal solution.Move the solution to 721 photometer and test the value of transmittancy in Condition of 130mm wavelength, 10mm diaphragm.