- Water-based defoamer series
- Oil-based defoamer series
- Oil-based non-silicon defoamer
- Oil-based organosilicon defoamer
- Washing products series
- Environmental momentary clean liquid laundry..
- Mild environmental hand sanitizer
- Washing free disinfectant king
- Oil-based coating additive series
- Feel smoothing agent
- Leveling agent
- Dispersant
- Integrated special product series
- Fountain solution special wetting agent
- Anti-sticking feel agent
- Water-based leveling agent
- Permanent smoothing king
- Non-foaming thickener
Defoamer for water-based varnish
I. Introduction
This product has special effect on the foam generated in water-based ink (varnish) of flexo/gravure water-based printing ink (varnish), acrylic resin emulsion, abietic resin, isopropyl acetate and other binders, especially on mirco-foam. It has the features of small dosage, long lasting defoaming, good water dispersion, excellent intermiscibility, no effect on film-forming property, no shrinkage or fisheye.
II. Technical indicators
| Model | BYC-f5623/f7620/f4012/f6624; | BYC-f7502/f7513 |
| Appearance | Ivory fluid | Light yellow liquid/translucent liquid |
| Viscosity | 1000—500cs | 2000-6000cs |
| Content | 25-90% | 99% |
III. Application
Various water-based printing inks mixing process, water-based varnish emulsion, water-based ink, etc.
IV. Using method: Add at paint mixing stage to remove the foam. The dosage depends and the recommended dosage is 0.1-1% of ink.
V. Packing and storage
25kg, 200kg drum. It is recommended to stir weel before use to ensure maximum using effect.