|
AVS Exterior-Wall Latex Paint (AVS)
AVS exterior-wall latex paint : This product is a high quality exterior-wall house finish that is made up of high quality and ultrafinely granular vinyl ester or versatic acid and vinyl acetate copolymer emulsion,inorganic nanometer colloid,imported pigment and auxiliary etc.
Functions and characteristics : With strong adhesion,firmly paint film.No phenomena of chalking and tearing.It can resist acid rain to corrode.It has fine performances of waterproof,alkali-resisting,resistant to scrub,able to bear ultraviolet performance,good weatherabilities,and it is strong to hid strength and fast color,and good antibacterial action,there are various fanshional color.
Brushing process : First,brush AVS exterior-wall alkali-resisting sealer on the wall for one time,and then daub AVS exterior-wall latex paint with high durabilities for two times.
Ways of daubing : Brushing,roller coating and spray coating etc..
Repainted period : At least six hours(temperature is at 25°C).
Coating weight : 5-7M2/kg/two times(theoretic value)
Wall surface treatment : The wall surface should be solid,smooth,clean and dry.Construct after polishing and levelling in exterior putty.
Packing : 22kg
Note : This product is stored in the environmental temperature is at 0-40°C.Keep out of the sun and penetrate directly.The processing temperature is above 5°C,not lower than 0°C.
AVS Exterior-Wall Alkali-resistant Sealer : This product is a exterior-wall house sealer.It can be form a complete set and used with other kind of latex finish to increase adhesive force,and it is alkaline to seal the wall surface.
Functions and characteristics : With fine performances of alkali-resistant for new beton and sealing,it has strong adhesive force and good recoatabilities that can improve the quality of finish and save finish.
Brushing system : First,brush AVS exterior-wall alkali-resisting sealer on the wall for one time,and then daub AVS exterior-wall latex paint with high durabilities for two times.
Ways of daubing : Brushing,roll coating and spray coating etc..
Coating weight : 8-10M2/kg/one time(theoretic value)
Wall surface treatment : The wall surface should be solid,smooth,clean and dry.Construct after polishing and levelling in exterior putty.
Packing : 20kg
Note : This product is stored in the environmental temperature is at 0-40°C.Keep out of the sun and penetrate directly.The processing temperature is above 5°C,not lower than 0°C.
SJ Exterior-Wall Putty Glue : This product is a exterior-wall house putty glue with strong adhesion.
Operation instructions : Exterior-wall putty is made up of putty glue,white cement and heavy calcium powder with the proportion1 : 1 : 1 respectively .
Packing : 20kg, 25kg |
