JA-9056 Speical Silicone Sealant For Plastic Aluminum Board

PRODUCTFEATURES:

• One-part, medium modulus, neutral cure.

• Outstanding weatherproofing ability and durable performance, excellent tensile and compression restoring ability.

• Excellent adhesion especially to AL-plastic board, glass, aluminum and stone.

• Non-irritant, no corrosive.

PRODUCT PURPOSES:

• Primarily use for glazing and sealing the seams between aluminum-plastic boards.

• Use for sealing the seams between glass, ceramic, stone and metal boards.

• Others.

APPLICATION:

• Clean with solvents such as toluene or keep the substrate surfaces completely clean and dry.

• For better appearance, cover outside of joint areas with masking tape before application.

• Cut nozzle to desired size and extrude sealant to joint areas.

• Tool immediately after sealant application and remove masking tape before sealant skins.

LIMITATION:

• Do not use as structural sealant.

• The surfaces coated with paint are unsuitable for sealant.

• In order to get best effect, choose the best botton.

PHYSICAL PROPERTIES:

Sealant skins..........60smax GB/T 13477

Extrusion ability..........8smax GB 16776-1997

Droop degree ¢ J.........14days

The results after 7days vulcanization under the condition of 50% Rh and 25 ¢ J as fellows:

Hardness.............25-55(shore A) GB/T 531-92

Extension rate...........300%min GB/T 13477

Tensile Strenght.........0.5Mpa min GB/T 13477

SPECIFICATIONS AND STORACE:

• Packed in standard PE cartridge with a volume of 300ml.

• Colors: white, black, green, brown, etc.