1, product performance
KY-303 is a high polymer organic emulsion contains many of the faculties groups, it can make the polyester fiber smooth, soft, fluffy, good handling feeling, high recovery and high anti-static characteristics, at the same time, improves the fiber’s friction-resistance.
2, product component
Working liquid component         recommended ratio
                  Ky303-A                                    60
                  Ky303- B                                    30
                  Ky303-C                                    10
                  Ky303-D                                  3.5-5
Suggested working liquid concentration ratio
(original products: water):1:5 ~ 15
Oiling rate %:0.3 -0.6
3, working liquid compounding method
1) according to the concentration and the proportion of the total amount of the expected liquid, calculate the weight of all components according to recommend ratio. pouring them into the kettle and stir.
2) pouring the needed amount of water into the kettle and start mixing, then pouring the weighted Ky301-A, B and C in to the kettle. Continue to stir about 15 minutes.
3) stopping mixing and storing the working liquid in storage tank for using.
4) heating is not needed during the working liquid preparation, room temperature water is advisable.
5) preparated liquid should be used during 12 to 24 hours.
4, oiling way
The finishing agent using the spray or the combination of dipping and spraying oiling method, either of them can achieve satisfactory finishing effectation.
5, the fiber heating setting process requirement
Oiled curly tow, short fibers must to be done heating setting processing. Suggesting temperature 150 ℃ ~ 170 ℃, retention time 10 min ~ 15 min, of course, concrete process parameters determined by fiber manufacturers.
6, fiber finishing effection
After the processioon, the short fiber is smooth, soft and fluffy, and will not be yellow.
7, the product security
no bad reaction to human skin in using procession, but please wash with a lot of clean water if it splash into eyes.
8, packaging and shipping quality
1), with 50 L or 200 L clean airtight plastic packaging.
2), stored in a ventilated shady and cool place, storage temperature 0 ~ 35 ℃. Storage period for half a year.
3), according to the non-dangerous goods shipment.