Ultrasonic transducer|Ultrasonic plastic welding machine|Ultrasonic lace machine|Ultrasonic spot welding machine|Ultrasonic Heat Sealing Machine--Changzhou Sunray Electronic Equipment Factory

1.demolition package, check whether all parts of the device surface and signs of damage, check for loose screws, electrical connectors are locking parts are complete.

2.equipment should be placed on a flat hard ground, lace machine requires at least 0.5 meters away from heat sources, and to ensure that the lace machine before and after at least 1 meter, so at least 0.5 meters of space to operate.

Accessories and related products, and promote a representative of the lace from the initial operation, has been developed to help you with our affordable range of your fastest machine installation range and lace

3.check box back plate of the oscillation voltage requirements, and to ensure that the system is grounded.

4.to the power source and gas source connection, note that the power switch off first. Note that the voltage requirements of the machine: AC220V ,50-60Hz

5. Air line connected to a clean and lubricant free compressed air source, rated operating pressure of 0.6MPa.