Ultrasonic transducer|Ultrasonic plastic welding machine|Ultrasonic lace machine|Ultrasonic spot welding machine|Ultrasonic Heat Sealing Machine--Changzhou Sunray Electronic Equipment Factory

1 demolition package, check whether all parts of the device surface and signs of damage, check for loose screws, electrical connectors are locking parts are complete.

2 equipment should be placed on a flat hard ground, lace machine requires at least 0.5 meters away from heat sources, and to ensure that the lace machine before and after at least 1 meter, so at least 0.5 meters of space to operate.

3, delivery installation time: winning bid notice is received 15 service deposit receipts and copies of invoices to a. square plastic one just too high from the purchase of PP non-woven lace machine, lace braiding machine Technical parameters: machine type (installation and non-woven lace machine.

4 the equipment and power source and air source level gauge connection, note that the power switch off first. Note that the voltage requirements of the machine: AC220V ,50-60Hz

5 and the air line connected to a clean source of compressed air without lubricant, rated working pressure of 0.6MPa.