JD DMP-10 |
PRODUCT NAME: |
JD DMP-10 |
PRODUCT CODE: |
JD DMP-10 |
COMPOSITION ON
INGREDIENTS:: |
Dimethylaminomethylphenol 25338-55-0
Phenol 108-95-2 |
EMPIRICAL FORMULA: |
Mixture |
GENERAL DESCRIPTION: |
JD DMP-10 curing agent is a technical grade of dimethylaminomethylphenol. It is similar to JD K54 curing agent in its behavior as a catalyst, but is less reactive. Blends of JD DMP-10 and JD K54 curing agents provide intermediate reactivity. |
ADVANTAGES: |
Reduced reactivity variant of JD K54
Low viscosity |
APPLICATIONS: |
Cure catalyst in adhesives
Accelerator for polyamide or amidoamine curing agents in coatings, castings, adhesives and civil engineering
Catalyst for anhydride cures in castings and laminates
Catalyst for epoxy/polysulfide cures |
STORAGE LIFE: |
At least 24 months from the date of manufacture in the original sealed container at ambient temperature. Store away from excessive heat and humidity in tightly closed containers. |
HANDLING PRECAUTIONS: |
Refer to the Material Safety Data Sheet for JD DMP-10 curing agent. |
TYPICAL CURE SCHEDULE: |
1) 1 hour at 176 °F (80 °C).
2) 1 hour at ambient temperature (polymercaptans).
3) 7 days at ambient temperature (polysulfides). |
TYPICAL PROPERTIES: |
Appearance: Pale Brown Liquid
Color (Gardner): 6
Viscosity @ 77 °F (25 °C) (cP): 20
Amine Value (mg KOH/g): 370
Specific Gravity @ 77 °F (25 °C): 1.03
Density @ 77 °F (25 °C) (lb/gal): 8.4
Flash Point (closed cup) (°F): 198
Typical Purity (%): 99.1
Recommended Use Level (phr)
with liquid resin: 5-15
as an accelerator: 1-.10
as a catalyst for anhydride, phenol and acid curing agents 0.5-2
as a catalyst for epoxy/polysulfide or polymercaptan cures 5-15 |
TYPICAL HANDLING
PROPERTIES: |
(15 phr loading)
Pot Life [25g @ 77 °F (25 °C)] (min) 60 |