This machine is sinking type centrifugal machine with manual upper unloading, discontinuous operation.The rotary drum wall does not have filter holes, so no need filter cloth for operation.It is used for solid-liquid separation of floating liquid with fine particles, high viscosity, low density, difficult regeneration of filter media.So, it is usually used for occasion when centrifugal filter can not ensure full and complete separation, it may also used for liquid-liquid separation.The machine corresponds to GMP series design.

Electric motor drives revolving drum to revolve at a high speed by clutch¡ê?material is added from the head of revolving drum. Light phase and heavy phase begin to be separated with scentrifugal action. Heavy phase is close to the wall of drum while the light phase is formed inner pendular ring. This clarified liquor can overflow revolving drum over liquid preventing board. Solid phase can be discharged from revolving drum when the machine is stopped.

Structural diagram of model SSC Centrifuge

1.Electric motor	2.Triangular belt	3.Drive wheel	4. Starting wheel	5.Cover
6.Centrifugal block	7.Driven wheel	8.Bottom bearing cover	9.Principal axis	10.Bearing block
11.Upper bearing cover	12.Brake ring	13.Water outlet	14.Triangle base	15.Zoccola
16.Rocking beam	17.Bottom head	18.Buffer spring	19.Seal ring	20.Brake handle
21.Zoccola cover	22.Outside shell	23.Barrel of revolving drum	24.Bottom of revolving drum	25.Liquid preventing board
26.Mainshaft nut	27.Principal axis cover	28.Bearing	29.Liquid separation installation	30. Rib board

Main specification and technical index

Type	Revolving drum					Separation factor	Power of electric machinekw	Weight of the whole machine kg	External dimensions (LengthWidthheight) mm
	Diametermm	Heightmm	Working volume L	Maximum weight of discharge kg	Rotating speed r/min
SSC450	450	220	17	21	1900	900	1.5	230	980730850
SSC600	600	300	40	50	1500	750	3.0	600	135010801100
SSC800	800	350	90	120	1200	640	5.5	1000	169013801200
SSC1000	1000	400	140	200	1000	560	7.5	1380	189015501250

Foundation drawing of Model SSC Centrifuge

Main installation dimension(unit:mm)

Type	A	B	C	D	E	F	G	M	L
SSC450	580	220	300	80	300	60	30	16	300
SSC600	850	250	400	100	400	80	60	18	400
SSC800	1080	260	500	120	500	100	120	20	500
SSC1000	1250	400	500	120	500	100	120	20	500

Guide for placing order

Material: Stainless steel, titanium alloy, carbon steel or rubber coating, plastic coating etc.
Methods of liquor drainage: overflowing installation etc.
Driving means:Common asynchronous motor or explosibility separation asynchronous motor etc.
Types of bases:Common base etc.

Note: The above technical parameter should refer to the product operation instructions. This product is covered with responsibility risk of PICC.