This is filter type centrifugal machine with manual bottom upper unloading, discontinuous operation. It is applicable to the separation of floating liquid which contains 5-6% solid phase(particle, crystal or staple fibre) or the particle with 0.5-1.5mm. The machine is of simple construction, convenient operation, procedures can be adjusted at choice, the filter residue can be sufficiently washed, thesolid-phase particles are not easily broken with good adaptability. It is widely used in the industries of chemicals, light industry, food, pharmacy-manufactruing, textile, metallurgical etc..

Adjustable speed motor drives revolving drum to revolve and adjust the rotating speed to middle speed. Material is added from the top of revolving drum and spread evenly on the wall of the drum. Liquid phase is discharged through filter cloth and filter opening in the drum wall by centrifugal action. Solid phase is left in the drum. Revolving drum revolves at a low speed and scraper scrapes the solid phase from drum wall and discharge at the bottom of centrifuge.

Structural diagram of model SG centrifuge

1.Electric motor	2.Triangular belt	3.Drive wheel	4.Driven wheel	5.Bottom bearing cover
6.Principal axis	7.Bearing block	8.Upper bearing cover	9.Discharging tube	10.Cam stand
11.Zoccola	12.Rocking beam	13.Bottom head	14.Buffer spring	15.Seal ring
16.Brake handle	17.Zoccola cover	18.Outside shell	19.Barrel of revolving drum	20.Bottom of revolving drum
21.Liquid preventing board	22.Feed of raw mix	23.Mainshaft nut	24.Principal axis cover	25.Base bearing
26.Scraper installation

Main specification and technical index

Type	Revolving drum					Separation factor	Power of electric machine kw	Weight of the whole machine kg	External dimensions (LengthWidthheight) mm
	Diameter mm	Height mm	Working volume L	Maximum weight of discharge kg	Rotating speed r/min
SG800	800	400	100	140	0-1200	640	7.5	3000	200014001700
SG1000	1000	400	140	200	0-1000	560	11	3500	225017001900
SG1250	1250	500	280	395	0-900	567	18.5	4200	260020002500

Foundation drawing of Model SG Centrifuge

Main installation dimension(unit:mm)

Type of machine	A	B	C	D1	D2	D3	R	L1	L2	L3	M
SG800	600	130	400	1270	1350	1085	160	500	200	160	24
SG1000	800	130	420	1500	1540	1200	175	600	310	200	24
SG1250	1000	130	500	1783	1885	1440	210	600	190	200	28

Guide for placing order

Material: Stainless steel, titanium alloy, carbon steel or rubber coating, plastic coating etc.
Driving means:Common asynchronous motor, explosibility separation asynchronous motor, electromagnetic varispeed motor or frequency control etc.

Note: The above technical parameter should refer to the product operation instructions. This product is covered with responsibility risk of PICC