|
PRODUCTS
INTRODUCTION
HIGH POLYMER
ADHESIVE
(¢ñ)Application
This product is applied to adhere common-extruded
composite products such as Aluminum-Plastic composite
tube, Aluminum-Plastic composite plate, Plastic-Steel,
Plastic-Copper, Plastic-Plastic etc. The temperature
of extruder is 130¡æ~190¡æ and the temperature of
die is 210¡æ~235¡æ.
(¢ò)Technical parameters
Main technical parameters (typical values) are
seen in the following table:
|
No.
|
Test item
|
Property
|
|
1
|
Melt index(E condition)(g/10min)
|
¡Ý1
|
|
2
|
Bond strength with Aluminum plate(peel
off)N/25mm
|
¡Ý100
|
|
3
|
Tensile strength(Mpa)
|
¡Ý14.0
|
|
4
|
Elongation at break(%)
|
¡Ý400
|
|
5
|
Melt point(¡æ)
|
125
|
|
6
|
Density(g/cm3)
|
¡Ý0.926
|
(¢ó)Packing
To prevent the product from damp, crosslinkable
PE are packaged with three layers: the outside
layer is brown packing paper, the middle layer
is PE plastic packing bag and the inside layer
is Aluminum foil packing bag. The standard package
is 25kg/bag.
(¢ô)Transportation and storage
During transportation and handling, it is important
that the product should not be placed in damp
and high temperature environment or be exposed
to sunshine and rain and the packing bag should
not be destroyed. It is very important to prevent
the product from damp and high temperature environment.
The guarantee period of the product is half of
a year.
|
