|
|
 Agrochemicals |
|
|
|
|
| SULICHEM |
FLAME RETARDANT |
| Specification replaced: Aug. 2006 |
CAS NO.: 84852-53-9 |
| SLFR-2 Decabromodiphenyl ethane |
|
| SLFR-2 is our new-developed neo-type additive fire retardant of bromine series. It has very good thermal stability, high bromine content and is hardly soluble in all solvents. It can be used in a wide range of styrenic polymers, engineering resins, wire & cable covers, insulator, elastomer and thermosetting plastics as well. |
Chemical name:
Decabromodiphenyl ethane (DBDPE)
Structural formula
Molar mass
971.2
Melting point
Appr. 345¡æ
|
Commercial name:
SLFR-2
Empirical formula
C14H4Br10
Odour
Odorless
Appearance
White powder |
| Thermally stable at ambient temperatures. |
| Technical demands |
|
|
|
|
Total bromine content
Whiteness
Melting point
Volatile
Free bromine
Average particle size
Appearance |
81.5%min.
83¡ã
345¡æ.min.
0.1%max.
10ppm max.
1~5um
white powder |
| Benefits£º |
|
|
1. SLFR-2 is a wide-ranged, white powdered and additive type fire retardant widely used. It has very good thermal stability, high bromine content and it exhibites good UV resistance. It has a lower transudation as compared to other fire retardant of bromine series, so it is especially suitable for slap-up materials used to produce computer, electrograph, telephone, manifdder, household electrical appliances etc.
2. SLFR-2 does not send off poisonous DBDO and DBDF when thermal cracking and burning. The materials fire-retarded by it is completely meeting European dioxin ordinances and are environmental friendly.
3. SLFR-2 is not acutely toxic, it is not teratogenic, and it is not harmful to fish. It is qualified for environmental protection.
4. SLFR-2 is quite stable for use in systems. The engineering resins using it can be recycled during using.
5. SLFR-2 reduces the disadvantageous effect compared to traditional fire retardant DBDPO and has a strong light stability and low transudation. |
| SLFR-2 Dose Recommended |
|
|
high polymer
fire retarded
|
SLFR-2 Dose |
Sb2O3 Dose |
Materials fire retarded
level UL94(1.6mm)
|
PP+14% Silicate |
22 |
6 |
V-0 |
HIPS |
12 |
4 |
V-0 |
ABS |
15 |
4 |
V-0 |
PS |
14 |
5 |
V-0 |
PBT |
10 |
5 |
V-0 |
Thermoplastic elastomer |
18 |
9 |
V-0 |
XLPE |
21 |
7 |
V-0 |
Thermosetting EP |
6 |
3 |
V-0 |
Disenhanced
PA(Nylon 66) |
14 |
5 |
V-0 |
Enhanced PA
(Nylon 66) |
14 |
5 |
V-0 |
LDPE |
6 |
2 |
/ |
HDPE |
8 |
3 |
/ |
|
|
| The dose may differ from the above diagram during using by users, the data above is only for reference. |
| Packing and transport information£º |
|
|
| Packing: |
| in 25kg WPP bag with inner PE bag |
1FCL 20#=20mt without pallet |
| |
1FCL 20#=20mt with pallet |
| in 800kg big bag with inner PE bag |
1FCL 20#=16mt with pallet |
| Transport: General chemicals. |
| More information and MSDS , please contact us by email : sulichem@suli.com |
|
|
| General notes:all data given in this leaflet are intended to inform you about our products , they are based on our present knowledge and experience and given without a guarantee and are subject to alterations. We recommend to test our products for their adequacy. A liability for violation of protective rights of third parties or infringements of legal regulations in excluded. |
 |
|
