It is a violation of national law to use this product in a manner inconsistent with its labeling.
This product is used to protect treated articles from decay, mold or mildew including Paint and Stain Films.
Longee 550CC, a micromilled flowable liquid, is dispersed during or after the pigment grinding operations for paints, stains and coatings.

DO NOT contaminate water, food or feed by storage or disposal. Open dumping is prohibited.
STORAGE: Store in a cool place. Protect from excessive heat.

Disperse 5 to 12 kg of LONGEE 550CC per 1000
Liter of exterior paint to obtain effective mildew control in the paint film after it is applied. Use the high rate in areas favorable to mildew and mold growth, such as where painted surfaces frequently are warm and moist. LONGEE 550CC, when added to stains designed for exterior wood, also protects the wood from surface molds and mildew stains caused by fungi.

LONGEE 550CC may be incorporated into adhesives to protect the applied adhesive films from mold growth and decomposition. Fully disperse 6 to 11 kg of LONGEE 550CC per 1000kg of adhesive while it is being manufactured.

To prevent sapstain and surface mold growth on freshly sawn wood, mix LONGEE 550CC into water-based dip treatment suspensions at the rate of 4 to 8 kg per 1000 kg of water. Use the high rate if the wood to be treated is expected to remain in undried condition for a prolonged period. Dip freshly-sawn wood products into the treatment suspension for sufficient time to permit thorough coating of the wood surfaces. Maintain thorough agitation of the treatment suspension while wood is being treated. Store treated wood in an area that is not subject to runoff into surface waters. Do not dispose of spent treatment suspensions in any manner that may contaminate soil or water.

To provide decay protection for composite wood products, such as flakeboard or particle board that is to be used for building siding, sheathing, construction timbers, decking or planking, incorporate LONGEE 550CC into the wood composite material while it is being manufactured. Use 6 to 10 kg of LONGEE 550CC per 1cubic meter volume of final wood composite. The high loading rate should be used in composite wood products that are intended to be installed in contact with soil or concrete, or where the wood is intended to be exposed to conditions with continuously high levels of moisture. Thoroughly incorporate LONGEE 550CC into the composite material as it is being ground, mixed or blended with adhesives or binding materials prior to final formation of the wood composite matrix.