Molecular sieve, PT963 filter, half-soft filler


     The molecular sieve is high strength and heat resistance. It has high specific aera and strong absorption.

Characteristics & uses

Model
bulk weightg/cm3
water absorption in static state%
abrasion loss rate
%
Application
3A
common type
0.63-0.68
21
0.3
The drying of oil gas and alkene
4A
common type
0.6-0.7
21
0.5
the drier of separation of alkane
5A
oxygen making type
0.65
21
0.4
the drier and absorbent of oxygen making
5A
desulfuration type
0.5
21
0.5
desulfuration and dewtaer of gas and petroleum
10X
common type
0.4
23
0.8
high efficient absorbent
13X
common type
0.6
25
0.4
The drying, cleaning and desulfuration of gas
13X
air separation type
0.7
25
0.2-0.4
drying and decarbon of air separation
Cu-13X
0.6
23
0.3-0.5
desulfuration of oil gas

     According to the material, the PT963 filter has quartz micro-pore ceramic, Al2O3 reinforced micropore ceramic, silicon-free micropore ceramic. The shapes include pipe, plate, brick, ball. According to the time, our products has fast, medium and slow speed.

The technical index of PT963 filter

Name
Unit
Value
volume weight
g/cm3
1.6-1.7
porosity
%
>35%
water penetration
kg/m2 , hour
>1500
air penetrability
m3/m2 mm H2O
>5
water absorption
%
>32
The radius of micropore
micron
5-200
compressive strength
Mpa
>13.5
folding strength
Mpa
>1.5
thermal stability
200-20 no crack in 3 times
hardness
 
>1
acid fastness
%
>99
fastness to alkali
%
>82

The specifications of PT963

micropore ceramic tube
external diameter mm
length mm
direct tube
32-200
500-1000
micropore ceramic plate
length mm
width mm
thickness mm
150-400
400-150
30-60
micropore ceramic brick
length mm
width mm
thickness mm
230
113
35-60
micropore rare earth sand
0.5-38mm

SB type combination filler( dia=200mm)

Dia
mm
Distance
mm
Weight
kg/m3 pond
membrane weight
kg/m3 pond
Number
p/m3 pond
200
50
9.5
115-125
500
200
60
8.2
95-117
417
200
80
6.3
85-98
313
200
90
5.5
75-89
278

polypropylene half filler
    It has high heat emission capacity and low resistance. It can be used in dyeing, medicine, beer, food, butcher, petroleum, chemical industry and coin industry. The spec has 120, 150, 200.

The specifications of polypropylene half filler

Item
Unit
A2
B2
C2
D2
E2
fiber bundle length
mm
40
60
80
120
160
distance
mm
20
30
40
60
80
fiber bundle quantity
bundle/m2
31250
9259
3906
1157
488
conversion number of single filler
m/m2
625
278
156
69
30
weight
kg/m2
22-24
12-14
7-8
3-3.5
2-2.5
the weight after filmed
kg/m2
450
200
110
50
30
porosity
%
>99
>99
>99
>99
>99
theory specific area
m2/m3
22254
9891
5563
2474
1390