Particle 8010 (FR-M8010)

The decabromodiphenyl dimethyl monobody particle is designed to eliminate the pollution brought by powder, and it can be injected into polymer without modified particle-shaping. It also features in fine dispersivity, and flame retarding effect and nice light resistancy, etc.. The anti-impact strength is remarkably improved as compared to the powder decabromodiphenyl dimethyl, which make it applicable in PA6, PA66, ABS, PP, PE, PBT, etc..

External Outlook: Milky white 3mm4mm cylinder particle

How to use: The quantity added should be equal to the powder 8010, and the particle-shaping can be achieved by injection or whorl pole squeezing after mixed with appropriate amount of particle Sb2O3(FR-M1220).

Basic Technical Parameter(PA6):

Item
Unit
Real Test Data
PA6
Portion
100
FR-M8010
Portion
18
FR-M1220
Portion
7
Pull Strength
Mpa
58
Growth rate at Break
%
50
Simple Support Beam Impact Strength(gapfree)
KJ/m2
150
Simple Support Beam Impact Strength(with gap)
KJ/m2
12
Cantilever Impact Strength (with gap)
KJ/m2
9.5
Burning Performance (UL-94)  
V0
Average Shrinkage Rate
%
1.2

Packing: 25Kg or 1000Kg plastic woven bag

Copyright(C)2002, Shanghai Hanfeng All Rights Reserved.
Supported by ChemNet ChinaChemNet Toocle Copyright Notice