Catalyst series

1. XH-1 type copper chrome hydrogenation catalyst
Use: Used in production of furancarbinol, aldehydes, carbonyl and grease hydrogenation.
Components: 45%CuO45%Cr₂O₃3-5%CaO or BaO
Physical form : Black powder, granularity:150-200 mesh
Property: Tap density:0.6-0.7kg/l specific surface:30-70m²/g
Use level: Furfural produces furancarbinol under the pressure of 5-8Mpa, temperature of 90-170, amount of catalyst used is 0.6-1.0%.
Note: 25kg paper bag or pail

2. XH-2 type copper silicon hydrogenation catalyst
Use: Used in production of furancarbinol with furfural
Components: 75%CuO15%SiO₂
Physical form : Blue powder, granularity: 150-200 mesh
Property: Tap density:0.5-0.6kg/l specific surface:40-70m²/g
Use level: Furfural produces furancarbinol under the pressure of 5-8Mpa, temperature of 180-200, use level of catalyzer:0.6-1.0%.
Note: 25kg paper bag or pail

3. XH-3 type copper chrome hydrogenation catalyst
Use: Used in production of furancarbinol, aldehydes, carbonyl and grease hydrogenation.
Components: 38-42%CuO45%Cr₂O₃ and other auxiliary agents
Physical form : Black brown cylinder(3.2*3.2mm)
Property: Tap density:1.5-1.7kg/l specific surface50m²/g
Use level: Furfural produces furancarbinol under the pressure of 0.03-0.05MPa, temperature of 90-170.
Note: 40kg/50kg paper bag or pail

4. XJ-1 type nitrogen oxide clarify catalyst
Use: Used in the production of tail gas and acid wash armor plate.
Components: 20-25%Cu₂Cr₂O₅70%Al₂O₃
Physical form : Black brown cylinder(9.0*9.0mm)
Property: Tap density:0.8-1.0kg/l specific surface50m²/g
Use level: operation under normal pressure, temperature:250-350.
Note: 50kg pail

5. Cogasin catalyst
Use: Used in the production of oil with synthetic gas.

77 Previous 88