"Juhua®" FJP-T3 FEP is mainly used in the extrusion of insulation layers and jackets for conducting wires, FEP pipes and films etc., and can meet the demands of most users. Compared with other Juhua® brands, it has better processability, lower impurity/non-melt matter content and better stability between batches. This product contains no PFOA and PFOS, and has been approved by UL (QMFZ2: E320038, QMTM2: E312670) and SGS.
Application
It is mainly used for the insulation and jackets of high temperatue wires and cables, also used for large-sized data, communication wires' jackets, insulation and high-temp./corrosion-resistant pipes, films etc.. It is not suitable for jackets and pipes with high requirements for stress resistance; or insulation of data/communication wires with special requirements for electrical properties.
FJP-T2 main performance data
No. |
Item |
Unit |
Value |
Test method |
1 |
Melt Flow Index(MFR) |
g/10min |
3~7 |
ASTM D1238 |
2 |
Breaking strength |
MPa |
23.0~32.0 |
ASTM D638 |
3 |
Elongation at break |
% |
300~330 |
ASTM D638 |
4 |
M.P. |
℃ |
265±10 |
ASTM D3418 |
5 |
Relative Density |
|
2.12~2.17 |
ASTM D792 |
6 |
Dielectric constant (106Hz) |
|
1.86~1.93 |
ASTM D150 |
7 |
Loss tangent(106Hz) |
|
5.0~7.0×10-4 |
ASTM D150 |
Note: Wider processing temperature range means better stability between batches.
Extruding machine material
It is corrosive to most metals, and anti-corrosion materials are suggested for the extruding machines, such as:
HA C-276 Inconel625 GH113
Recommended processing conditions
Extruding machine L/D(L/D): 25: 1~30: 1;
Screw compression ratio: 3: 1;
Equilibrium ratio: 1.0~1.03;
Draw ratio: 140~170.
Recommended temperatures with cable speeds above 80m/min:
Area 1 ℃ |
Area 2 ℃ |
Area 3 ℃ |
Flange ℃ |
Machine head ℃ |
Die orifice ℃ |
Cooling |
290~310 |
320~340 |
350~370 |
370~380 |
375~385 |
375~385 |
Air |
Notes
FEP resin will become more corrosive when decomposed, therefore, we should avoid operation at high temperature.
When heated, FEP can generate small amount of organic fluoro-containing waste gas. During the disassembly and assembly of die, the lubricating oil in heated status will also release unpleasant gases. These gases will be harmful to human body when inhaled! They should be discharged outdoor through exhaust system.
Packing
It is semi-transparent granular solid. In PE bag which will be put in hard fiber drum; or in double-layer reinforced plastic bag; net wt. 25kgs/drum(bag).
Storage
Should be stored in clean, cool and dry place; avoid rain, sunlight, moisture and dust.
Tel: +86(0)570-3612068, 3617214, 3090574
Fax: +86(0)570-3090574, 3094663
Cell Phone: 13362001133(Mr. Xu), 15305701118(Mr. Zhou)
Website: www.juhuafjc.com
Email: fjcxh@juhuafjc.com fjchy@juhuafjc.com fjcgxk@juhuafjc.com fjczcy@juhuafjc.com
Zip code: 324004
Add.: Within Juhua Group, Quzhou, Zhejiang, China.
|