| | | | | |

 

Wanlongbrand amino fluorescent baking paint

I . Introduction
    Alkyd resin and amino resin are selected as the basic material, daylight fluorescent pigments as coloring reagent of the wanlongbrand amino fluorescent baking paint, it possesses incomparably gay and bright color.
    It can be used widely in many products which possesses gay and bright color, for examples, children vehicle, toy and bicycle etc.

II . Mainly technical index (Executive standard:Q/RWH 111-2001)
Appearance It accords with the chromatism range, but also has level and smooth paint film.
Particle size (μm) ≤50
Solid content % ≥60
Dry time (130±2oC) hr 1
Viscosity (Smear-4 cup) sec. ≥80
Shock strength (cm) ≥30

III . Assortments
    Pink; Red; Orange yellow; Green; Lemon yellow; Blue.

IV . Applied illustration
    1 . The white priming paint should be coated firstly before construction in order to show bright color and the thickness of color paint should reach 75 μm, then coated with varnish again.
    2 . The product must be stirred evenly before construction. composition of the mixed diluent : toluene : Butanol=4 : 1, it used to regulate suitable thickness before construction.
    3 . The product must not be mixed with other paints.
    4 . The suitable baking temperature of the product is about 130oC,l hour.
If the temperature is too high with too long time, the paint layer will become fragile, lose light and change it's color. If the temperature is too low with too short time, the paint layer will be too soft and the adhesion will be decreased.
    5 . The paint layer must be baked before next coating, such as priming paint, color paint and coating varnish.

V . Package
    Packed in clean, dry and sealed iron bucket, Net weight 18kg.