Ammonium paratungstate
Sodium molybdate anhydrous
Sodium molybdate dihydrous
Ammonium molybdate
Ammonium Heptamolybdate
Ammonium Tetrmolybdate
Molybdenum powder
Ferro-Molybdenum
Molybdenum disulfide
Molybdenum oxide
Sodium Tungstate
Ammonium paratungstate
Molybdenum bar/plate
Molybdenum wire
Phosphoric acid
PRODUCTS

Molybdenum Wire for Cutting

Specification(mm normal)
Length(m)
0.20
1500-1800
0.18
1800-2500
0.16
1800-2500
0.15
1800-2500
0.14
2500-3500
0.13
2500-3500
Note: We can make as per buyer's requirement.

Made from the first rate raw material, processed by the special equipment and new technology, mainly used for wire cutting.

Characteristics are as followings:
1. High tensile resistance, about 12% higher than the GB4182-1997 standard, not easy to be broken under the same condition.
2. Weak extending, no more than 3%, uneasy to elongate, the stability and size exactness can be improved.
3. High stability, high exactness and long-term durability.
4. Vacuum packing, long term storage and quality unchangeable.


Copyright(C)2007,Heshan Wode Tungsten & Molybdenum Co.,Ltd All Rights Reserved. Supported by ChemNet ChinaChemNet Toocle Copyright Notice