|
Intend
Uses
|
Used to repair and fill up the floor surface before painting with all
kinds of floor finish in order to provide smooth
conductive surface for next coat.
|
|
Product
Description
|
It's
film is nontoxic, tasteless and do not produce
any pollution. It can be applied by doctor blade
method. May obtain thick film. After drying, no
contraction and crack happens to the film. This
paint product is easy to be applied. The film
possesses good adhesion and high strength. Its
appearance is smooth.
|
|
Product
Information
|
Volume
Solids
|
100%
|
|
Color
|
In general, light yellow. Other colors can also be made.
|
|
DFT
|
According to substrate smoothness. High thickness of film can be made
with doctor blade method, if necessary
|
|
Theoretical
Coverage
|
8.3-12.5 m2/Kg (0.08-0.12Kg/m2), based on one coat
with doctor blade application.
|
|
Application
Details
|
Mix
ration
|
A:
B = 5:1 (By weigh)
|
|
Method
of Application
|
Doctor-blade
Method: Pour the mixture on the floor and apply quickly with doctor blade.
|
|
Thinner
|
In general, unnecessary. If necessary, use OUP 103
|
|
Cleaner
|
OUP
103
|
|
Pot Life
|
For
Summer: 35℃:
20-25min; 25℃:
30-45min
For
Winter: 15℃:
30-45min; 5℃:
45-60min
|
|
Drying Time
|
Substrate
Temperature
|
Touch
Dry
(h)
|
Hard
Dry
(h)
|
Completely
cure
(d)
|
Over
coating Interval
|
|
Minimum
|
Maximum
|
|
35℃
25℃
15℃
5℃
|
≤4
≤8
≤8
≤12
|
≤8
≤12
≤12
≤24
|
≤1
≤3
≤3
≤5
|
8
12
12
24
|
Unlimited
|
|
Storage
and Handling
|
|
Storage
|
Dry
and cool conditions, Storage Life: One year
|
|
Pack Size
|
A:
20 Kg in 20 litre container; B:
4 Kg in 4 litre container
|
|
Flash Point
|
＞65℃
(Mixture, A and B)
|
|
Specific Gravity
|
1.6-1.7
Kg/L
|
|
Specification
and Surface Preparation |
Before application with this paint product, all cracks, joints,
protrudent and hollow spot on the floor should
be filled up and repaired correctly. Should
apply over primer sealer. The surface to be
painted should be sealed up and it is clean and
dry. Please consult our company or
specifications of primer sealer for related
preparation method of floor.
Recommend using the paint for summer when the temperature is over 20℃ at the application site and if it is between 0-20℃, use the paint for winter. To be attentive, this paint
will cure very slowly below 5℃.
Must mix component A and B according to the practical necessary quantity.
Recommend making this paint just before painting
with it. Should stir to even before application.
It is recommended to use up in pot life in case
it would cure and could not be used.
When the film is hard dry, paint with subsequent coat. |
|
Safety
Precautions |
This
product should be used in painting area by
professional operators. When painting, please
refer to Product Data Sheet and MSDS. Consult
our company if consumers could not completely
understand the precautions for safety and health
when applying this product.
Although
this paint product is free of solvent, minimal
safety precautions, as follow, should be done in
order to avoid danger or accident:
This
paint is flammable, so must be far away from
open flames.
In
general this paint has no danger of explosion.
However, enough ventilation is necessary at
application site.
Because
the paint liquid is harmful, protect skin and
eyes, and avoid touching with paints (Recommend
to wear working clothes, gloves, eye protection,
face masks, barrier creams and so on). If paint
gets in touch with skin, wash fully with a large
amount of fresh water and soap or appropriate
commercial cleaner. In case of eyes being
contaminated, rinse with fresh water for 10min
at least and give medical treatment immediately.
Recommend
face guard with ventilation pipe for the sake of
no absorption of paint fog and harmful solvent
gas, especially in badly ventilated conditions.
Handle
empty containers with care and do not bring
about environmental contamination.
NOTICE: If consumers haven't taken effective safety precautions (Refer to the
specifications), our company will NOT be
responsible for any accident. |
