The general and  high performance anticorrosive coat system and economic benefit analysis
 for steel structure outside.......read it 

           Is the steel structure in various atmosphere anticorrosive environment protected with the traditional alky, phenolic paint or the high performance epoxy, polyurethane paint? The article analyses and compare the two systems in properties, painting manners, repairing intervals, working life, economic benefit with the accurate, detailed examples and ample theory. It gives you a conclusion: the high performance coat system is much better in effect and lower in comprehensive price than the general coat system.

The corrosion of the sulphurous water and shielding
 in oil fields and abstracting oil factories .......read it

The sulphurous water erodes the containers pipeline, dirt pool and tank in the oil fields and abstracting oil factories. It contains much erosive medium, such as H₂S, NCH, HN₃, CO₂, CL^-, SO₄^2- etc. the temperature degree reaches 70-80 centigrade, the common paint cannot reach the anticorrosive requirement. Base on the survey of various enterprises, the author suggest to use the epoxy furan resin paint, epoxy polysulphur paint, epoxy flaking and vinyl ester paint that have been applied and tested in practical application with good effect .

Newly paint ---acrylic rubber anticorrosive paint that has both the advantage of 
acrylic paint and chlorinated rubber paint........read it 

The paint bases on the main materials of the chemical modified acrylic rubber resin, it has both anti-ultraviolet and gross and color retention of acrylic paint and the industrial atmosphere, chemical atmosphere and marine atmosphere resistance to the environment erosion property of chlorinated rubber paint. It can avoid the polluting CCL₄ that is discharged by the resin production process. At the same time the film presents excellent adhesion and abrasion resistance and good effect to the galvanizing surface.  

Anti-corrosive coat system for steel structures........read  it

In order to design a effective and economics anti-corrosive coat system for steel structures, we must consider the anticorrosive conditions, painting conditions, working life, expense etc.

The surface specification  of the cement ground before painting high performance floor paint.......

          Now there are a good many floor paint and painting enterprises in the market. Some constructional groups make use of the shortage that the consumers do not know completely the floor paints. They do not refer to the specification, reduce the materials, do not consider the ground condition and the surface, and paint blindly. Which makes the blistering, cracking, peeling occur, make the consumers have poor impression on the floor products, thus these effect on the newly products to be used widely. The article details the general floor ground condition in floor painting process and cement ground requirement for boosting floor painting quality and wear ability. Such as strength, level, water content, maintain period etc. The article presents the appropriate manner of surface treatment and suggestion according to various ground condition.

The study and application of light color antistatic paint .......

Because the conductive medium is limited (such as conductive carbon black, pitch power etc.), most of conductive paints are deep tint or metal color. But Osaka Paint company breaks through the color limitation, imported newly white and light color conductive power to study and develop various solvent based or solvent free antistatic paints (such as white, green, yellow, blue, red etc). The anti-static ratio of these paints is 10⁵-10⁸ ohm, it completely accords with the standard requirements in various properties.