55-60%

Many colors. Customer may choose one color based on RAL or GSB Color Card.

50-200 μm, according to the need.

4.7-5.7 Kg/m², based on  two coats, whose dry film thickness (DFT) is 100μm respectively.

A: B = 4:1 (By weigh)

Brush or Roller: Recommended. Paint two coats.

Airless Spray: Suitable.

Air Spray: Suitable, but some thinner is necessary.

OUP 104

OUP 104

15℃:4h; 5℃:6h; -10℃:8h.

Substrate Temperature

Touch Dry
(h)

Hard Dry
(h)

Completely cure 
(d)

Over coating Interval

Minimum

Maximum

15℃
5℃
-10℃

≤1
≤2
≤4

≤18
≤24
≤36

≤3
≤5
≤7

18h
24h
24h

2d

3d

5d

Dry and cool conditions.  

 Storage Life: Component A: One year; Component B: Six months.

A: 16 Kg in 20 litre container;  B: 4 Kg in 4 litre container

＞28℃ (Mixture, A and B)

1.05 - 1.15Kg/L

    Before application with this paint product, all cracks, joints, protrudent and hollow spot on the floor should be filled up and repaired correctly. The floor also should be painted with primer sealer and intermediate coatings. This product may be applied over the coat of filler or mortar.  The surface shall  be  clean and dry.
    This paint has a good performance of cure at low temperature. 

    During storage or application, shall keep this product away from water vapor.
    Must mix component A and B according to the practical necessary quantity. Recommend making this paint just before painting with it. Should stir to even before application. It is recommended to use up in pot life in case it would cure and could not be used.
    When the film is hard dry, subsequent coat should be applied. Until it cures completely, it could not be used as normal.

This product should be used in painting area by professional operators. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.

This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done:

The paint contains volatile solvent and is flammable. So must keep away from sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above on Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air, so we suggest painting should be stopped above the temperature of flash point.

Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m³ of ventilation quantity per 1Kg solvent (according to the solvent) is necessary.

Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barrier creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.

Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in badly ventilated conditions.

Handle empty containers with care and do not bring about environmental contamination.

NOTICE: If consumers haven't taken effective safety precautions (Refer to the specifications), our company will NOT be responsible for any accident.