|
FPFAS512
Solvent Free Epoxy Self-leveling Anti-static
Paint
Intend
Uses
|
Applied as antistatic finish to floors or walls, which require antistatic
or anti-explosive coatings, such as in electric
factory, control room, computer room, printing
factory, spinning mill etc.
|
Product
Description
|
Because this paint is free of solvent, its film is nontoxic, tasteless
and do not produce any pollution. This paint has
excellent self-leveling property, so easy to be
applied. The film possesses good adhesion, high
hardness, and resistance to dust. Its stable
antistatic property can work for long time. Its
appearance is beautiful.
|
Product
Information
|
Volume
Solids
|
100%
|
Color
|
Black, Grey, green, blue, red, yellow etc.
Limited colors.
|
DFT
|
Depending
on the surface smoothness and application method
Spray, roller or
brush: 0.2-1.0 mm; Trowel: 1.0-3.0 mm
|
Theoretical
Coverage
|
0.8-0.83m2/ Kg (1.2-1.25 Kg /m2), based on dry film
thickness of 1mm.
|
Application
Details
|
Mix
ration
|
A:
B = 4:1 (By weigh)
|
Method
of Application
|
Trowel:
Recommended,
apply quickly with toothed trowel and the
surface painted should be smooth.
Airless Spray:
Suitable, only for smooth surface.
Brush or Roller: Suitable, only for smooth surface.
Air Spray: Not recommended, If use,
Thinning is necessary.
|
Thinner
|
OUP
103
|
Cleaner
|
OUP
103
|
Pot Life
|
For
Summer: 35℃:
20-25min; 25℃:
30-45min
For
Winter: 15℃:
30-45min; 5℃:
45-60min
|
Drying Time
|
Substrate
Temperature
|
Touch
Dry
(h)
|
Hard
Dry
(h)
|
Completely
cure
(d)
|
Over
coating Interval
|
Minimum
|
Maximum
|
35℃
25℃
15℃
5℃
|
≤4
≤6
≤6
≤8
|
≤8
≤12
≤12
≤24
|
≤3
≤5
≤5
≤7
|
/ |
/
|
Storage
and Handling
|
Storage
|
Dry
and cool conditions, Storage Life: Six months
|
Pack Size
|
A:
16 Kg in 20 litre container; B:
4 Kg in 4 litre container
|
Flash Point
|
>65℃
(Mixture, A and B)
|
Specific Gravity
|
1.20-1.25
Kg/L
|
Specification
and Surface Preparation |
Before application with this paint product, all cracks, joints,
protrudent and hollow spot on the floor should
be filled up and repaired correctly. Should
apply over primer sealer and other coats (such
as filler or resin mortar). The surface should
be sealed up and smooth, clean and dry.
Recommend using the paint for summer when the temperature is more than 20℃ at the application site and
if it is between 0-20℃, use the paint for winter.
To be attentive, this paint will cure very
slowly below 5℃..
Must mix component A and B according to the practical quantity. Recommend
making this paint just before painting with it.
Should stir to even before application. It is
recommended to use the paint mixture up in pot
life in case it would cure and could not be
used.
After painting, may walk on the floor in 24 hours. It cannot be used
until it cures completely.
The appearance of the film depends on environmental temperature and
humidity. Ambient temperature should be more
than 10oC and relative humidity is
less than 85% for good appearance. |
Safety
Precautions |
This
product should be used in painting area by
professional operators. When painting, please
refer to Product Data Sheet and MSDS. Consult
our company if consumers could not completely
understand the precautions for safety and health
when applying this product.
Although
this paint product is free of solvent, minimal
safety precautions, as follow, should be done in
order to avoid danger or accident:
This
paint is flammable, so must be far away from
open flames.
In
general this paint has no danger of explosion.
However, enough ventilation is necessary at
application site.
Because
the paint liquid is harmful, protect skin and
eyes, and avoid touching with paints (Recommend
to wear working clothes, gloves, eye protection,
face masks, barrier creams and so on). If paint
gets in touch with skin, wash fully with a large
amount of fresh water and soap or appropriate
commercial cleaner. In case of eyes being
contaminated, rinse with fresh water for 10min
at least and give medical treatment immediately.
Recommend
face guard with ventilation pipe for the sake of
no absorption of paint fog and harmful solvent
gas, especially in badly ventilated conditions.
Handle
empty containers with care and do not bring
about environmental contamination.
NOTICE: If consumers haven't taken effective safety precautions (Refer to the
specifications), our company will NOT be
responsible for any accident. |
|
|
|
|