100%

Light brown (Not colored); Many colors (Colored)

1-10mm, depending on the application method

According to the content of sand. In general, based on film thickness of 1mm, A: 0.2-0.4Kg/m²; B: 0.1-0.2Kg/m²; Some kinds of quartz sand: 1-2 Kg.

Depend on the painting purpose and application method. In General, please refer to the following table. (By weight).

Self-leveling Type: Recommend troweling method. Pour the mixture on the floor, and then apply with appropriate toothed trowel.  When the thickness of film is reached, release the air in the film by bubble-removed roller with nails several times. (If the coat is thin, the finial operation is unnecessary).
Daubing Type: Pour the mixture on the floor, and then apply quickly with appropriate toothed trowel. When the thickness of film is reached, smooth the surface by grinding machine.
Doctor-blade Type: For repair of floor

OUP 103

OUP 103

For Summer: 35℃: 20-25min; 25℃: 30-45min
For Winter:  15℃: 30-45min;  5℃: 45-60min

Substrate Temperature

Touch Dry
(h)

Hard Dry
(h)

Completely cure 
(d)

Over coating Interval

Minimum

Maximum

35℃
25℃
15℃
5℃

≤4
≤6
≤6
≤8

≤8
≤12
≤12
≤24

≤1
≤2
≤2
≤5

8
12
12
36

Unlimited

Dry and cool conditions, Storage Life: One year

A: 20 Kg in 20 liter container; B: 20Kg in 420liter container; Sand: 50Kg per bag.

＞65℃ (Mixture, A and B)

0.95-1.05 Kg/L

    Please consult our company about detailed information. The surface to be painted should be clean dry and free from dust, grease or other dirt. Before this paint product is applied as self-leveling paint, all cracks, joints, protrudent and hollow spot on the floor should be filled up and repaired correctly. Should apply over primer sealer.
    Recommend using the paint for summer when the temperature is above 20℃ at the application site and if it is between 0-20℃, use the paint for winter. To be attentive, this paint will cure very slowly below 5℃.
    Must mix component A and B according to the practical necessary quantity. Recommend making this paint just before painting with it. Should stir to even before application. It is recommended to use up in pot life in case it would cure and could not be used.
     The appearance of the film depends on environmental temperature and humidity. Ambient temperature should be over 10^oC and relative humidity is less than 85% for good appearance.

    This product should be used in painting area by professional operators. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
    Although this paint product is free of solvent, minimal safety precautions, as follow, should be done in order to avoid danger or accident:
    This paint is flammable, so must be far away from open flames.
   In general this paint has no danger of explosion. However, enough ventilation is necessary at application site.
    Because the paint liquid is harmful, protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barrier creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
    Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in badly ventilated conditions.
    Handle empty containers with care and do not bring about environmental contamination.
    NOTICE: If consumers haven't taken effective safety precautions (Refer to the specifications), our company will NOT be responsible for any accident.