100%

Light brown, transparent

Infiltrative, infiltrate depth is depends on the substrate conditions.

According to the conditions of the substrate. In general, 0.1-0.4 Kg/m²

A: B = 2:1 (By weigh)

Doctor-blade Method: Recommended. Apply 1-3 coats with doctor knife so that the substrate could be sealed up.
Brush or Roller: Suitable. Cracks and joints should be in painted so that the substrate could be sealed up.

OUP 103

OUP 103

For Summer: 35℃: 20-25min; 25℃: 30-45min
For Winter:  15℃: 30-45min;  5℃: 45-60min

Substrate Temperature

Touch Dry
(h)

Hard Dry
(h)

Completely cure 
(d)

Over coating Interval

Minimum

Maximum

35℃
25℃
15℃
5℃

≤4
≤6
≤6
≤8

≤8
≤12
≤12
≤24

≤1
≤2
≤2
≤3

8
12
12
24

Unlimited

Dry and cool conditions, Storage Life: One year

A: 20 Kg in 20 litre container;  B: 10 Kg in 10 litre container

＞65℃ (Mixture, A and B)

0.95-1.05 Kg/L

    Please consult our company about how to apply floor paints. It should take 20 days at least to complete a painting project on new floor. Water content of the substrate should be less than 8%. Before application with this paint product, all cracks, joints, protrudent and hollow spot on the floor should be filled up and repaired correctly, The surface should be dust-off, clean and dry.
    Recommend using the paint for summer when the temperature is above 20℃ at the application site and if it is between 0-20℃, use the paint for winter. To be attentive, this paint will cure very slowly below 5℃.
    Must mix component A and B according to the practical necessary quantity. Recommend making this paint just before painting with it. Should stir to even before application. It is recommended to use up in pot life in case it would cure and could not be used.
     If the substrate is highly porous, recoat with this primer sealer some times so that the substrate should be sealed up, in case pinholes or bubbles would take place after the next coat, may paint the next coat after the film is hard dry.

    This product should be used in painting area by professional operators. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
    Although this paint product is free of solvent, minimal safety precautions, as follow, should be done in order to avoid danger or accident:
    This paint is flammable, so must be far away from open flames.
   In general this paint has no danger of explosion. However, enough ventilation is necessary at application site.
    Because the paint liquid is harmful, protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barrier creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
    Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in badly ventilated conditions.
    Handle empty containers with care and do not bring about environmental contamination.
    NOTICE: If consumers haven't taken effective safety precautions (Refer to the specifications), our company will NOT be responsible for any accident.