It is fit for the protection of liquid water products from microorganism, such as emulsion varnish, macromolecular synthesis latex, bond, enamel, loading agent and sealant. It can be used for additive in diluted metal manufacture liquid. The normal working concentration is 0.05～0.40%, which is up to the product storing condition and whether the products are easy to be corroded by microorganism.

Steady univalent metal salt does not contain isothiazolinone/bronopol pesticide of VOC. It is fit for the water hygrometric state antiseptic of the products allergic to formaldehyde and bivalence metal ion.

It is a new generation of synergism antiseptic that does not contains CIT, AOX and VOC, especially for the water hygrometric state antiseptic of the products allergic to formaldehyde and bivalence metal ion. It can be used to protect the water products (such as emulsion varnish, polymerization latex, adhesive, enamel, loading agent, sealant, etc.) from hazardous microorganism pollution under hygrometric state, especially for high PH value environmentally protective products. The recommended concentration is 0.2 - 0.4%.

Aqueous CIT/MIT formulation (monovalent metal ion stable)

It is fit for the protection of water products from microorganism, such as emulsion varnish, macromolecular synthesis latex, cosmetic, detergent, adhesive, enamel, loading agent and sealant, and it can be used for additive in diluted metal manufacture liquid. The normal concentration is 0.05～0.40%. It is especially fit for the products that do not dissolve in Mg2+/Cu2+ divalent ion antiseptic.。

Aqueous CIT/MIT formulation
(magnesium salts stabilizer)

It is fit for the protection of water products from microorganism, such as emulsion varnish, macromolecular synthesis latex, cosmetic, detergent, adhesive, enamel, loading agent and sealant, and it can be used for additive in diluted metal manufacture liquid. The normal concentration is 0.05～0.40%.

Aqueous MIT formulation

It is a kind of anti-corrosion active solution fit for coating, base, adhesive and other industrial products. The anti-corrosion active matter of this product can be used in the protection of coating that touches food. It is the pure water solution of anti-corrosion active component that does not contain VOC and AOX. The normal adding amount range is: 0.05—0.15%.

Aqueous BIT formulation

It is a broad-spectrum antiseptic that does not contain formaldehyde. It can protect the industrial water base products from the breaking of bacteria, microzyme and epiphyte. It is stable in alkali condition, and can be used to protect oil-in-water solution, polymerization latex, latex, water based paint, paint, adhesive, detergent, cleaning solution, textile industry spinning solution and the bacteria control in paper-making industry. It does not have CIT and AOX. Dosage：0.1-0.3.

It is fit for the cleaning of tube and equipment and short-time anti-corrosion of latex. The dosage is 0.05-0.5%.

It has strong killing ability with broad activity range and lower effective dosage compared to general preservative. It can be nearly used in all the paints, such as acrylic acid, polyvinyl acetate (PVA) and other latex, solvent paint and alkyd paint. It is liquid, so it is easy to add in latex and paint.
Adding it during adjusting paint: mix it with propanediol and texanol, and then slowly stirring it, later adding thickening agent. The general dosage is 0.1～0.3% of product weight.

It is a high efficiency coating film antiseptic with excellent anti-elegant and bacteria-proof. It can be widely used in quite important areas, such as broad-spectrum anti- microorganism and low water-solubility, especially for the ade paint. In order to protect coating film, the largest dosage of active component is 1150ppm. The outdoor dosage is 0.12-0.5% of product weight.

It can effectively restrain bacteria, microzyme, mildew, wood fading epiphyte and algae. The recommended dosage is 0.5–2.5% and the largest is 4%.

HENCIDE BBIT

94．5%

BBIT

PVC，Polyurethane，Polyolefins，Acrylics

0.1-0.3%

HENCIDE BBIT10

9．5%DIDP

BBIT

PVC，Polyurethane，Polyolefins，Acrylics

1-3%

HENCIDE DC20

20%DIDP

DCOIT

Vinyl, polyurethane and other polymeric compositions

0.4-1%

HENCIDE DC20

25%DIDP

OIT

Vinyl, polyurethane and other polymeric compositions

0.15-0.36%

HENCIDE PHMG100

99%

PHMG

Polyurethane/ Polyester/ ABS/ PS/ PVC/ PE / PP

0.2-0.7%