HX-PU4 High-duty Clean Floor Coating  
  HX-1 Non-solvent Epoxy Self-leveling Floor Coating  
  HX-5 misfiring antistatic and abrasion-resistant floor coating  
  HX-101 Solvent-borne Epoxy Floor Coating  
  Waterborne polyurethane anticorrosive coating  
  HX-PU3 (PU/EP interpenetration) special anticorrosive coating  
 
HX-PU4 High-duty Clean Floor Coating HX-1 Non-solvent Epoxy Self-leveling Floor Coating
HX-5 misfiring antistatic and abrasion-resistant floor coating HX-101 Solvent-borne Epoxy Floor Coating
Waterborne polyurethane anticorrosive coating HX-PU3 (PU/EP interpenetration) special anticorrosive coating
HX-PU4 High-duty Clean Floor Coating
Technical index   Description
Appearance
smooth, glossy or matt
Impact Strength (kg.cm)
50
Pendulum hardness
≥0.6
Cross cut adhesion
0
Flexibility mm
≤1
Drying time
Initial cure <4 Full cure ≥12
Abrasion resistance g(500g1000r)
weight loss ≤0.0129
Mildew resistance
0
 
HX-PU4 is a two-component polyurethane based coating. It has high adhesion and mechanical strength, capable of withstanding 30 to 50-ton vehicle and impact of 1Kg steel ball dropping from 1.5 meters of height. It has excellent color rentention and corrosion resistance, tolerable to industrial waste gas/liquid and organic solvents.
HX-PU4 can be provided in different forms for glossy, dull and/or anti-slip flooring according to user's requirement.
Anti-corrosion performance Application Guide
Item name Technical index
Acid resistance(20%H2SO4, 30d) no foaming, no pulverization, no falling
Acid resistance(5%HCl, 30d) no foaming, no pulverization, no falling
Alkali resistance (50g/l, NaOH, 30d) no foaming, no pulverization, no falling

The surface to be treated must contain less than 8% of water. Mix the two components proportionately and thoroughly as needed prior to use.
First apply bottom coating, usually with PU resin. 6 hours later, apply putty with trowel, and polish when the putty dries. Apply putty and polish when the putty dries again. Then apply HX-PU4 for 2 to 3 times at the interval of above 12 hours.
HX-PU4 can be applied at below zero.
We can offer coating solutions upon user's request

Waterproof performance   Uses  
Item name Technical index
Imperviousity 0.3Mpa30min impervious
Anti-permeability MPa≥ ≥0.6
Compressive strength MPa≥ 11
 
This product is suitable for production places with requirements of wear and cleanliness. It can be used in medicine, textile, electrical appliances, food, automobile, light industry, chemical industry, can, color printing and other production workshop, warehouse, office, parking lot, etc
Packing:28kg/set, Plastic drum or metal pail
Shandong yanzhou sun paper
Shanghai International Agricultural Exhibition Centre
Jiangsu Dajiang Metal Materials Co., Ltd.
Underground parking of Xuhui garden, Shanghai
 
Home  |  About us   |  Products  |  Purification decoration  |  Honors  |  Case  |  Contact us   |  中文版
Copyright(C)2012,Shanghai Hukai Construction Engineering Co., Ltd. All Rights Reserved.  Supported by ChemNet ChinaChemNet Toocle Copyright Notice