Today:  
  PPC POLYOL
Water-based PU dispersoid
Water-based adhesive series
Water-based Industrial resin series
Water-based Wood resin series
Water-based Leather resin series
CO2-based film grade...
CO2-based new materials
 
 
JL-WD-5101


Recommended process: Spray or brush, not less than 25 degrees room temperature, 15 minutes to surface dry, drying at 50 degrees for more than 45 minutes or natural drying at room temperature over 12 hours to repaint.
Storage: Below 40 degrees, sealed tightly, avoid sunlight.

 
    Back
 

 
Home |  About NewsProduct |  QualityStrategic cooperationCulture |  JobContact us   | 中文版
Copyright(C)2012 Jiangsu Zhongke Jinlong-cas Chemical Co., Ltd. All Rights Reserved. Supported by ChemNet ChinaChemNet Toocle Copyright Notice