Acrylic Impact Modifier (AIM) for Rigid PVC Products-DM Series
Acrylic PVC Processing Aid-Sparking Regulator DF Series
Acrylic PVC Processing Aid---DP Series
Chlorinated Polyethylene (CPE)
Cable Jacket & Insulation Compounds and other compounds
Chlorinated Polyethylene Elastomer-Special Rubber CM361M

 

I. Product Properties

This product is a kind of amorphous elastomer with minimal crystallinity. It has both low Mooney viscosity and low plasticization temperature as well excellent properties such as good procesabllity, outstanding heat-aging resistance, excellent cold resistance, excellent weathering resistance, good flex resistance and flame-retardant.

II. Technical Specification

No. Item Unit Test Method Value
1 Chlorine Content % GB/T7139 35±1
2 Remained Crystallinity % DSC ≤2
3 Volatility % GB/Y2914 ≤0.5
4 Shore Hardness (A)   GB/T2411 ≤55
5 Tensile Strength Mpa GB/T1040 ≥8
6 Mooney Viscosity ML(1+4)121°C   GB/T1232 60±5
7 Elongation at Break % GB/T528 ≥700

 

III. Application

This product can be used by itself as a kind of special synthetic rubber, as well as a modifier or compatilizer for general purpose of synthetic rubber. It can be blended with CR, CSM, NBR, EPDM, SBR and NR.

So, it is widely used in flame retardant cable and wire sheaths, seals, conveyer belts, hoses, V-belts, acid-resistance and oil-resistance rubber tubes, water-proof sheetings and automobile weather strips, etc.

The above rubber can be processed by common equipment and technology in rubber industry.

IV. Packing

In 25kgs PP woven bag with PE inner liner or depends on our customer's needs.

V. If necessary, we can offer the recommended formulation and technical service to our clients.

 

 

 
Copyright(C)2006, DanDong DeCheng Chemical CO., LTD. All Rights Reserved. Supported by ChemNet ChinaChemNet Toocle Copyright Notice
About us   |  Honors  |  R&D  |  Serivce  |  Products  |  Order  |  Contact |  Chinese