|
 |
| • Your Location:Home -- Products |
|
|
| EBS(N'N-Ethylene bis-steaaramide) |
| |
|
N'N-Ethylene bis-steaaramide
| Brand |
"Ocen" |
| Type |
EBS |
| Current price |
11000.00 yuan/ton |
| Min orcder quantity |
1 ton |
| Total supply content |
100 ton |
| Consignment date |
consignment in 5 day |
| Valid period |
2011-01-23 |
|
|
|
[ Introduction ]
Relying on experienced chemical experts and workers, our EBS can meet the leading international standards.
Product name:Heat-resisting Plastic Lubricant EBS
Alias:N'N-Ethylene bis-steaaramide
Molecular formula:C38H76N2O2
Molecular weight:593.04
Properties: White powder or fine granules. Insoluble in water and organic solvents under room temperature; powdery product is wettable at above 80°C and soluble in hot chlorinated hydrocarbon and aromatic hydrocarbon. Relative density 0.98, Melting point 140°C, Flash point 285°C.
Technical indexes:Q-320281HJH003-1996
Chroma |
≤8 |
Acid value |
≤10 |
Amine value |
≤2.5 |
Melting point (°C) |
140°C-146.5°C |
Loss on heat(%) |
≤0.5 |
Fineness(through 200 to 325mesh sieve%) |
≥30 |
|
Packing:20kg/bag
Stored in a cool; ventilating place. Avoid flame, sunlight and moisture. Non-hazardous chemicals
1)used as plastic process auxiliary agent for thermoplastic and thermoset plastics. Significantly improve dispersibility and processability.
2) used as antisticking agent of polymer film and sheet material, dosage is 0.5-1%
3) as lubricant , it can work well with other lubricants. It can be used as demolding agent for of ABS,AS, hard PVC, polyformaldehyde, PC,polyurethane &; phenolic resin, dosage is 0.5-1.5%
4) It can work with stabilizer in the formulation of inorganic filling PVC and polyolefine. Moreover, it offers good appetency to pigment and coating, so it can improve the commercial value of products.
5)It can be used as nucleation transparent agent to reduce the nucleation time of polyolefine, polyformaldehyde and polyamide.
6) It also can be used as rubber process aids
7) It can improve the performance of pigment in coating
8) It can be added into polyester and polyamide fiber to improve the resistance to heat and elements. It also can be used as additive of antistatic nylon fiber to reduce the breakage of fiber. |
|
|
|
|
