Performances and features:
Feiyun printing mill base is a color thick slurry liquid, it has the performances and features such as complete color spectrum, bright color, high dyeing ability, fine and average fineness, good firmness, besides these, it also has the following advantages: 1. uneasy swell, 2. uneasy sediment, 3. much more stable chemical performance, 4. reaching the requirement of international environmental protection. In addition, this product has wide applicability, it can print on cotton, flax, glue, terylen, acrylic fibers, as well as various blend fabrics; can print on the materials such as leather, wood, paper and imitation leather; can be used for the painting of water materials such as interior wall paint, cement, synthetic detergent, soap, cosmetics, pulp and etc. It can obtain satisfactory effect whether adopting drum, plaint net or spray for printing. Feiyun printing mill base can be used coordinating with domestic and foreign commonly used cementing agent and thickening agent, the method of printing on the fabric is as following:

1. Reference formula: mill base: 10-100g, cementing agent: 150-300g, thickening agent: 10-35g, emulsifying agent: Xg, synthesis: 1kg. 2. Attentions: (1) The above formula is only the most common printing method, if you want to obtain the satisfactory printing effect, you can adjust it properly. (2) It can be used again only stirring it sufficiently if part grain of paint sediments after deposited over a long period of time. Method of deposit: <Feiyun> printing mill base should be kept at the well ventilated, cold and dry place avoiding contacting with acid materials, you should pay attention to the leak tightness of the deposit contain, and it must be covered tightly after use avoiding the printing mill base contacting with air over a long period of time and preventing the grain of the mill base condensing or forming film on the surface: the temperature of deposit is 0°C-40°C, which should not be too cold or too hot. Chemical stability: Seeing the attached table for chemical stability of Feiyun printing mill base.