HP-III Antidripping agent
The components of product, Features, Uses & Method of use:
1.The components of product: HP-III PE antidripping agent is the mixture of Polyol ester, polyethylene glycol compounds and amine compounds.
2.Technical index:
| Item | Index |
| Appearance | Ivory or light yellow flaky solid, without foreign impurities. |
| Total amine value | 40-60(mgKOH/g) |
| Saponification value | 100-140(mgKOH/g) |
| Acid value | ≤5.0(mgKOH/g) |
| Volatile matter | (105°C, 2h)≤1.5% |
| Melting point | 48-55°C |
3.Uses: : Mainly used for dripping polyethylene shed film, can also be used in preservative film.
4.Features: With the flow drops made of polyethylene films, can reduce or eliminate the droplets on the membrane, could increase the relative sunlight through the degrees, can improve the tent to moderate ground temperature, dripping lasting period of up to 100 days or more.
5.Method of use: , because of the surfactant is easy to make the screw slippage first commonly made from dripping masterbatch, then blend blown film and polyethylene resin.
6.(1) For film of 0.1-0.12mm, dosage is 1.4-1.5%, increasing dosage for thinner film.
(2) For three-layer composite coextrusion film, the total content of auxiliary should not be less than 1.3%.
(3) Dosage in packaging film or preservative film is 0.8-1.0%.
(4) For antifog film, dosage of antidripping agent should be increased for keeping balance with antifogging agent..
- Packing: PE bag lined PP woven bag, Net wt 20Kg.
- Storage and transportation: avoid moisture and insolation. seal the bag tightly after you use this agent.