|
Overview
Staroy PC/ABS,
featuring the favorable characteristics of starex
ABS such as moldability, better impact strength at
low temeratures, and metal plating, is a remarkable
engineering plastic with the essential properties
needed for engineering plastics. staroy PC/ABS explicitly
shows character by combining the excellent mechanical
and electrical properties, heat resistance, dimensional
stability of polycarbonate, and the high qualities
of ABS such as workability, and secondary processability.
Moreover, the heat stability, weather resistance,
and flame retardant promote the plastic's usefulness
as a material in automobiles, electric and electronic
goods. Flame retardant plastics are essential for
fire safety. staroy PC/ABS is a remarkable flame retardant,
but also super-weather resistance and heat stability.
Environmental problems, which are one of world's greatest
issues, led Cheil Industries Inc. to develop the phosphorous
flame retardant PC/ABS which completely solved the
toxic problems caused during the combustion of halogen
flame retardants.
|
Features
1) Processability
Due to the processability of ABS, staroy PC/ABS shows
better flow characteristics than PC. This solves problems
such as warpage and stress-cracking after molding.
The attributes required after molding such as electromagnatic
interference shielding by plating, surface and design
flexibility endows a similar secondary processability
to ABS.
2) Mechanical Properties
Staroy PC/ABS provides excellent impact strength in
comparison with other engineering plastics. This impact
stabilized resistance leads to its application in
structural materials and other exterior parts. Staroy
PC/ABS is available in a wide temperature range showing
remarkable mechanical strength compared to other engineering
plastics. This property is suitable when cold or heat
resistance is required in products.
3) Chemical Resistance
Staroy PC/ABS, in general, is stable in alcohol, water,
oil, and salts, but it can swell or melt or even crack
when it is in contact with alkali, aliphatic hydrocarbons,
and chlorinated hydrocarbons. Their selection of appropriate
solvents is advisable when applying secondary processing
parts such as metal plating and painting, or while
used along with chemicals.
4) Dimensional Stability
Staroy PC/ABS show good dimensional stability by its
minute shrinkage changes whether perpendicular or
parallel to the flow direction. Generally, in the
case of filler reinforced grade with the orientation
of the filler alongside the injection direction, the
mold shrinkage rate differs whether the direction
is perpendicular or parallel to the flow, thus resulting
in warpage. However, application to super precision
parts will be satisfactory when the special staroy
PC/ABS grade is used.
|
Properties
1) Remarkable Heat
Stability
This generally known flame retardant grade has a difficult
molding process caused its poor heat stability. The
main cause is due to the addition of flame retardants
and additives, which give black streaks. Non-halogen,
phosphorous flame retardant PC/ABS has an extremely
reliable heat stability allowing the flexible design
of the molding conditions such as the type of hot
runner and pin point gate, and other.
2) Various Flame Retardant PC/ABS against
Environmental Problems
Flame retardants that could produce toxic materials(Dioxin,
Difuran) during combustion are not used at Cheil Industries
products. Development of non-antimony flame retardant
grades and non-halogen phosphorous flame retardant
grades provide a wide choice for environmentally safe
products. The non-antimony flame retardant PC/ABS
contains outstanding heat stability when compared
to halogen flame retardant grades. staroy non-halogen,
phosphorous flame retardant PC/ABS completely resolved
the post-molding stress cracking problems observed
in other non-halogen flame retardant PC/ABS resins.
3) Variety in Grades
General grades
- Grades with similar properties of ABS provide good
flow properties and metal plating.
- Grades are available for automotive parts that gives
steam/super-weather /high-heat resistance and thermal
degradation resistance. Flame retardant grade(UL certificate
achieved)
- Grades are divided in thickness and flammability
by the addition of high functional flame retardants
: V-2, V-1, V-0, 5V
- High heat resistance (HDT 115℃) grade
- special grades that contain high heat stability
without using antimony trioxide. Phosphorous flame
retardant grades Non-halogen phosphorous flame retardant
PC/ABS resins ranging from general to high heat resistance
grades. These grades solve the toxic problems possibly
caused by halogen flame retardant products during
combustion.
4) Weather Resistance
General grade staroy PC/ABS shows little change in
mechanical strength and discoloring when exposed to
light due to its good weather resistance. The staroy
PC/ABS flame retardant grade offers various desirable
grades ranging from general flame retardant to super-weather
resistant flame retardant grade. This is acquired
by applying the original techniques of cheil Industries
Inc. and use of remarkable weather resistant flame
retardants.
Type & Applications |
|
Class
|
Grades
|
Characteristics
|
Typical
Application |
General
|
HI-1001BG |
Plating
|
Hand
phones, car phones, wheel caps, work
station housing, refrigerator door
handles, instrument panels |
HI-1001B |
High
impact resistance |
HI-1001BS |
High
flow |
HR-1008B |
Heat
resistance |
HR-1008W |
Excellent
weatherability |
HP-1000B |
Resistant
to thermal degradation |
HP-1001
|
High
modulus ,flow, impact resistance.
|
Flame
retardant |
VB-1108R |
V-0,
weatherability |
Notebook
PC housing, lap top housing, monitors
|
VB-1108RS |
V-0,
Excellent weatherability |
VB-1202R |
V-0
|
VB-1202F |
V-0,
High heat resistance |
VB-1203R |
V-2 |
VB-1107 |
Non-antimony
& thermal stability |
VB-1109 |
Glass
fiber reinforcement |
HM-1101G |
High
flow, GF 10% |
Facsimile
frames, Camera parts, Products requiring
dimensional stability Products requiring
high rigidity |
HM-1201G |
High
impact resistance, GF 20% |
HM-1301G |
Heat
resistance, GF 30% |
HM-1302A |
High
flow, lower shrinkage GF/MF reinforced
|
HM-1102G |
GF
10% |
HM-1202G |
GF
20% |
HM-1302G |
GF
30% |
Non-halogen
flame retardant |
NH-1000F |
Low
warpage |
CD-Rom |
NH-1000T |
High
flow |
Monitor
|
NH-1014 |
High
heat resistance |
Monitor,
note pc |
|
|
|