Products >> Redispersible Polymer Powder
VE-3211 |
|
Parameters:
Category |
Item |
Index |
Component |
VAC/VeoVa/E |
Properties |
Appearance |
White powder |
Solid content, % |
99 ± 1 |
Stacking density,
g/l |
450 - 600 |
Ash content (burning
under 1000 ℃), % |
10 ± 2 |
PH value |
6 - 8 |
Lowest film forming
temperature, ℃ |
0 |
Glass transition
temperature,℃ |
0 ± 3 |
Security |
Non - toxic |
Packaging |
Multi - layer of
paper bag |
25 kg/bag |
Usages:
This product belongs to polymer powders polymerized by vinyl
acetate, advanced fatty acid vinyl ester and ethylene and has
good flexibility. It can be dispersed in water, enhance the
adhesion strength between mortar and supports and improve the
mechanical properties of mortar. The film of model HW-5116
has good flexibility, strength and plasticity, wear resistance
and strong deformation ability. Moreover, HW-5116 is able to
effectively enhance the bending and tensile resistance of materials
in polymer cement mortar and therefore its crack resistance
is good enough to prevent materials from cracking effectively.
Applications:
Insulation (EPS, XPS) mortar
Plastering (anti - crack) mortar
Waterproof mortar
Insulation system
Flexible putty of external wall
Flexible thin - layer mortar
Wearable floor
Concrete repair
Wall plaster
Bonding mortar
Interface agent
Caulked joint paste
Interior or exterior paint
Packaging and storage:
It is packed in paper bags enclosed plastic bag. The net weight
is 25kg/bag.
It must be stored in a cool, dry place and the unused part shall
be sealed as soon as possible after opening the bag in case of
moisture absorption.
Its useful life is 6 months and it should be used as early as
possible under high temperature and wet conditions to avoid increasing
the agglomeration probability.
Because of the thermoplasticity of the powder, the stacked height
of the product is not allowed exceeding one tray.
|