Product description |
It is a kind of thermosetting powder coating produced by modification polyester resin and firming agents. |
 |
Powder properties |
Density |
1.2~1.8g/cm3 |
Granularity |
The general diameter of particle30~38um,<64um particle proportion>99%, or customizing |
Volatility |
<1% |
Softening point |
60~95℃ changing according to different color luster |
Fluidity |
It has good fluidity and is easy to transportation. The fluidity index can be got from our local liaison office. |
Storage stability |
<30℃Storage,1 year |
|
Film performance |
Spraying area |
8 -12 m 2 /Kg , film thickness 70 μm (100% powder occupating coefficient ) |
| |
False speedy aging |
GB 5237.4 |
Passing |
| |
Impact |
GB 5237.4 |
Passing |
| |
Bending |
GB 5237.4 |
≤ 3 mm |
| |
Concave |
GB 5237.4 |
>6mm |
| |
Adhesive force |
GB 5237.4 |
0 grade |
| |
Rigidity |
GB 5237.4 |
>80 |
| |
Poaching |
GB 5237.4 |
Passing |
| |
Acid resistant |
GB 5237.4 |
Passing |
| |
Mortar resistant |
GB 5237.4 |
Passing |
| |
Solvent resistant |
GB 5237.4 |
Passing |
| |
Thickness of coating |
60-70um film thickness |
| |
Salt spray resistance |
GB 5237.4 |
1000hours |
Passing |
| |
Muggy resistant |
GB 5237.4 |
1000hours |
Passing |
| |
Light fastness |
ASTNG53-88 QUV UV313 cycle 4hr UV 60℃
4hr condensation 50℃
|
|
Execution conditions |
Pre process |
Steel |
Parkerising treatment |
| Notice: the pre process should be inspected once in 2 hours, and the inspecting methods should be according to the medicine suppliers’ requirements or our company’s pre process introduction. |
Spraying |
This series is fit for the following spraying methods: static spraying; friction static spraying; and some other spraying methods (requiring in advanced). |
| Notice: the pre process should be inspected at least once in 2 hours, and the inspecting methods should be according to the customers’ requirements or our company’s film test methods. |
Solidifying conditions |
200℃ x 10minutes |
|
Others |
Application area |
It is a special powder coating . It is specially used for bottom film spraying of heat transfer printing technology. The heat transfer printing technology can form all kinds of appearance effects on bottom film surface, such as grain, variegated glass, etc. or even can transfer the image to the film surface. It is quite fit for the painting of aluminum alloy, metal furniture, etc. |
Special effect |
Many effects, such as wrinkle, metal, color blended, etc. for special surface effect coating , please refer to our company’s use guideline. |
Packing and transportation |
15Kg in paper skin lined with polyethylene, non-dangerous goods, transported by all kinds of ways, avoiding sunlight, avoiding damp and hot and avoiding in touch with chemical goods. |
Safety |
It does not have TGIC.Please refer to our company’s operation guideline, and ask our company’s Safety Technology Report from our liaison office.
The special coating for children’s toys should tell us in advanced, because it should be produced in some special technologies to guarantee that there are no hazard factors in our products. |
