|
WSFR-TDCP/LV
Low viscosity Flame retardant for polyester and polyether foam
Product Name: WSFR-TDCP/LV
The product an additive type flame retardant with good efficiency and is widely used in pvc resin, polyurethane foam, epoxy resin, etc. It is the low viscosity version of WSFR-TDCP.
Technical Parameters
Appearance |
transparent liquid |
Viscosity under25℃ |
900~1100cps |
Odor |
Slight |
Phosphorus content,% |
>7.4 |
Chlorine content,% |
>47.5 |
Water solubility,30℃(W/W),% |
<0.1 |
Color(APHA) |
≤100 |
Acid number (mgKOH/g) |
<0.1 |
Water content(%,W/W) |
<0.1 |
Specific density(25℃) |
1.48±0.01 |
Typical Applications
A low cost flame retardant with good stability, WSFR-TDCP/LV is widely used in the production of foam in strips or blocks. I t can meet the following flame retardant standards:
BS 5852 Crib 5 DIN 75200 CSE RF4 Class 1
Storage Suggestions
For most material for the manufacturing of containers, such as low-carbon steel, stainless steel and epoxy resin for the inner lining, there is no effect on WSFR- TDCPP/LV, It is suggested that moisture or other sources of pollutants should be kept away from the product as best as possible during storage.
Safety and Handling
Contact with eyes -- wash eyes with ample amount of water for at least 15 minutes.
Contact with skin -- wash with cold water or using soap.
Ventilation -- suitable amount of ventilation needed.
Packing and Transportation: 300kg N.W. in iron drum or 1500kgs IBC.
|
|