Alkyl polyglucosides series (APG1214)
Example of applications:
APG1214 is a nonionic surfactant that provides superior detergency, emulsifying, penetrating and surface tension reduction properties. It shows good compatibility with all other types of surfactants. Synergistic and thickening effects can be found, especially when mixed with CAPB, SLS, SLES, etc.
APG1214 is very effective in hard surface cleaning and processing. Like all APG products, APG1214 is mild and readily biodegradable.
Due to its unique performance in cleaning, emulsifying and thickening, APG1214 is widely used in personal care products, hard surface cleaners, I&I cleaners, agrochemical emulsifiers and formulations which require thickening effects.
Due to the presence of magnesium oxide (max. 300ppm) and the high pH value, turbidity, which has no negative effects on performance, may occur. When pH value is adjusted to neutral, its turbidity disappears. There may be crystallization when the product is stored at room temperature.
There may be sedimentation depending on storage time. In this case, the product should be heated and stirred until uniform before use.
| Name | APG1214 |
| INCI Name | LAURYL GLUCOSIDE |
| CAS No. | 110615-47-9 |
| Appearance, 25°C | Pale yellow liquid/paste |
| C chain distribution <= C10 C12 C14 C16 (base substance: Fatty alcohol) | 0%～2% 70%～80% 20%～30% 0%～2% |
| Active Content (100-water, wt %) | ≥50.0 |
| pH (10%aq solution) | 11.5-12.5 |
| Free Alcohol (wt %) | ≤1.0 |
| Ash (wt %) | ≤4.0 |
| Viscosity (mPa·s), 20°C | >3000 |
| Butyl glucoside | 0 |
| Water (wt %) | 47-50 |
| Density (g/cm3), 25°C | 1.07-1.09 |
| DP | 1.3-1.5 |
| Surface tension (mN/m), 25°C, 0.1% | 28-30 |
| Microorganism (Total viable count , CFU/g) | ≤10 |
Notice:
When APG products were stored at room temperature, there would be crystalline precipitate or turbidity due to the presence of alkyl mono-glucoside and MgO or at high pHs, which had no negative impacts on the properties. When neutralized to pH 7, the turbidity would vanish. APG1214 should be heated to 45°C-50°C and mixing uniform before use. APG0810 can be prepared according to customers needs (actives 70±2%, pH: 7-10.0).
Packaging and transportation:
50kg, 200kg plastic barrels pack or determined in accordance with customers needs. Transacting transportation.