|
|
Flocculants and Coagulants For
Reverse Osmosis
Our
membrane compatible coagulants and flocculants can increase pre-filtration
efficiency and help improve productivity in membrane systems for worry-free RO
feed water. Suitable for direct filtration processes, multi-media filters and
clarifiers and other gravitational separation systems, POLYT series products.
- Improve liquids/solids separation.
- Are compatible with all RO and thin-film composite
membranes.
- Assure consistent SDI feed-water specifications set
by membrane manufactures.
- Increase resistance to filter breakthrough compared
to metal coagulants.
- Provide better color removal than organic
polymers.
- Are effective over a broad PH range.
- Minimize flushing time and backwash waste.
- Reduce treatment.
POLYT 705
POLYT
705 is a complex macromolecule flocculants which is used in the multi-material
filtration. It takes effect on flocculation and sedimentation. The optimum
results can be obtained in the high PH water. In addition, this product have no
request to adding agent system and material of tubes.
Characters:
-
This product is available in the RO systems.
-
The PH of this product is 3.0-4.5
-
The dosage is 2.0-10.0ppm, available in over wild
range of PH.
-
This product is available in the flocculent
treatment of drink-water, industrial water as well as wastewater.
-
Coagulation rate and sedimentation rate is good
-
Blend with water at any scale.
-
Add and operate simply.
POLYT 706
POLYT
706 is a complex macromolecule flocculants that is used in the multi-material
filtration. It takes effect on flocculation and sedimentation. The optimum
results can be obtained in the high PH water. In addition, the product have no
request to adding agent system and material of rubes.
Characters:
-
Measure up the ANSI/NSF standard certificate.
-
This product is a liquid cationic polymer, have a
cationic charge and low-molecule. Diffuse easily water and react with the solid
of suspend, so is called coagulant.
-
Replace the Aluminium, Ferric types inorganic
coagulant in part or completely. The dosage is 1/10 quantity of the Aluminium,
Ferric types inorganic coagulant. If used together with the Aluminium, Ferric
types inorganic coagulant, It can degrade the dosage of inorganic coagulant.
-
PH of this product is 7, which can not charge PH of
the treatment water.
-
The dosage is low which can not produce hydrate
deposit. So have an excellent sedimentation.
-
Available with over a rang of PH 1-14, but the
Aluminium, Ferric types inorganic coagulant can't be available.
-
Eliminate turbidity and sterilize effectively.
-
Not affected by adding the chlorine and not increase
the solution metal(such as Aluminium, Ferric)
-
Improve the speed of solid-liquid separation, when
directly filtrating, extend the week period of filtration.
|
