HomeCataloged ListAlphabetic ListWhat's NewContact

 

Upper level
Flocculant/Coagulant for RO
Antiscalant/Antifoulant for RO
Cleaner for RO,UF and EDI
Biocide for RO,UF and EDI

 

 

Cleaners

PT-ROCLEAN 111 For Reverse Osmosis


PT-Roclean 111 is a low PH liquid formulation designed to remove metal hydrate, calcium carbonate, and other particulate deposits from polyamide thin-film composite and hollow fiber Reverse Osmosis as well as Nano-filtration and Ultra-filtration membranes. This product provides superior cleanings allowing longer run times.  To obtain optimum results, PT-Roclean 111 should be used in combination with PT-roclean 131.


Characters:

  1. Compatible with polyamide thin-film composite and cellulose acetate membranes.

  2. Low foam formulation

  3. Buffered to maintain.

  4. PH2.-4.0 over a range of dilutions.

  5. Liquid cleaner which allows shorter mixing time.

  6. Blend with water at any scale.

PT-ROCLEAN 131 For Reverse Osmosis

PT-Roclean 131 is a high PH liquid formulation designed to remove metal hydrate, calcium carbonate, and other particulate deposits from polyamide thin-film composite and hollow fiber Reverse Osmosis as well as Nanofiltration and Ultrafiltration membranes. This product provides superior cleanings allowing longer run times.

 

Characters:

  1. Compatible with all the polyamide thin-film composite membranes.

  2. Optimum results are obtained when used in conjunction with combined with PT-ROCLEAN 111.

  3. Extremely effective against oils and many other organic compound.

  4. Excellent results when used to clean biological matter and eliminate biological slime from the membrane surface.

  5. Enhaced performance at elevated temperature.

  6. Buffered to maintain PH 10.5+-0.5 over range of dilutions.

  7. Liquid cleaner which allows shorter mixing time.

  8. This product is a pale emulsion, delaminating, immediately use after shaking up.

PT-UFCLEAN 100  For Ultra-Filtration

PT-UFclean 100 is a low PH liquid formulation designed to remove metal hydrate, calcium carbonate, and other particulate deposits from UF (Ultra-filtration) membranes. This product provides superior cleanings allowing longer run times. To obtain optimum results, PT-UFclean 100 should be used in combination with PT-Ufclean 200.

CHARACTERS:

  1. Compatible with polyamide thin-film composite and cellulose acetate membranes.

  2. Low foam formulation

  3. Buffered to maintain PH 2.-4.0 over a range of dilutions.

  4. Liquid cleaner which allows shorter mixing time

  5. Blend with water at any scale

PT-UFCLEAN 200 For Ultra-Filtration

PT-Ufclean200 is a high PH liquid formulation designed to effectively remove the organic, protein, colloid, sludge and slime of the UF (Ultra-filtration) membrane. This product provides superior cleanings allowing longer run times.

CHARACTERS:

  1. Compatible with all the composite membranes.

  2. Optimum results are obtained when used in conjunction with combined with PT-UFClean 100 and PT-UFBIO 300

  3. Extremely effective against oils and many other organic compound.

  4. Excellent results when used to clean biological matter and eliminate biological slime from the membrane surface.

  5. Enhace performance at elevated temperature.

  6. Buffered to maintain PH 10.5-11.5 over range of dilutions.

  7. Liquid cleaner which allows shorter mixing time.

  8. This product is a pale emulsion, delaminating, immediately use after shaking up.

PT-EDIClEAN 1000 For Electrodeionization

PT-EDIClean1000 is a low PH liquid formulation designed to remove metal hydrate, calcium carbonate, and other particulate deposits from EDI (Electrodeionization) stocks membranes. This product provides superior cleanings allowing longer run times. To obtain optimum results, PT-EDIClean 1000 should be used in combination with PT-EDIclean 1100.

 

CHARACTERS:

  1. Compatible with EDI stock membranes.

  2. Low foam formulation

  3. Buffered to maintain PH 2.0-4.0 over a range of dilutions.

  4. Liquid cleaner which allows shorter mixing time

  5. Blend with water at any scale

PT-EDIClEAN 1100 For Electrodeionization

PT-EDIclean1100 is a high PH liquid formulation designed to effectively remove the organic, protein, colloid, sludge and slime of the EDI (Electrodeionization) membrane. This product provides superior cleanings allowing longer run times.

 

CHARACTERS:

  1. Compatible with all the composite membranes.

  2. Optimum results are obtained when used in conjunction with combined with PT-EDIClean1000 and PT-EDIBIO1200

  3. Extremely effective against oils and many other organic compound.

  4. Excellent results when used to clean biological matter and eliminate biological slime from the membrane surface.

  5. Enhanced performance at elevated temperature.

  6. Buffered to maintain PH 10.5+-0.5 over range of dilutions.

  7. Liquid cleaner which allows shorter mixing time.

  8. This product is a pale emulsion, delaminating, immediately use after shaking up.

Copyright 2005 Wuzhou International Co., Ltd. (China)   All rights reserved   Last Updated May, 2005