QJD Batch Heating Agitator Drier is one kind of highly effective
energy saving continuous drying equipment. It has two kind of revolution
axes for selection: coil tube type (G) and vane type (Y). The coil
tube type revolution axis has compact structure compact and large
heat transfer area, is suitable for treating the loose granulated
and powdery material; The vane type revolution axis attaches a kind
of special cleaning mechanism which can eliminate the material that
adhere to the vane surface, is suitable for processing the paste-like
material. Comparing it with the biax stirring dryer, this kind of
dryer has compact structure, low construction cost, small material
crashing ratio, wide applicable scope. It is one of the newest stirring
driers.
The material enters into the dryer through the feeder, being heated
by the heat-transfer surface of the dryer shell body jacket and
the revolution axis, at the same time is fully stirred by the revolution
axis that drives by the speed adjusting motor drive, the heating
surface renews unceasingly, finally is discharged out of the exit
of the dryer, carries on the moisture evaporation in the transportation
process and dry the material. By adjusting the charging rate, the
spindle speed of the dryer as well as the opening of the poling
board, controlling the control residence time of the material in
the drier, thus control product moisture content. This dryer's heating
carrier can separately adopt the saturated steam, heat conducting
oil, hot water, negative pressure steam, etc. according to the characteristic
of the dry material.
Our factory manufactured QJD series batch heating agitator drier,
summarized many years' service experience of the stirring dryer,
its structure synthesized the domestic and foreign similar products
strong point, the coil tube type revolution axis dryer's heat transfer
area is 5-160M2 and the vane type revolution axis dryer's
heat transfer area is 4-125M2. At present, it is the
continuous-running stirring dryer series which has the most advanced
structure, and the most complete specification in China.
|