Principle:
 This
unit makes use of the oscillating-hammers which rapidly revolve
surround the horizontal shaft, form a cyclone vortex field in every
furrow according to the shape of lining toothed-plate furrow with
the revolution of rotor. The direction of this vortex is on the
contrary with the main vortex direction formed by rotor, to make
particles impace and bump each other. The particles bump with the
oscillating-hammer to be further ground. Fine particles discharge
from discharge-screen. Coarse particles are continuously pulverized
in the Pulverizing Chamber. So this unit also has the function of
classification. On the other hand, the gap between the front of
the oscillation-hammer and the lining toothedplate also has shearing
action. So this unit is extensively applicable to pulverize tenacity
and fibre materials.
JCW610 hammer type machinery mill is applicable for chemical, dyestuff,
foodder, etc. And it is extensively applicable for black pigment
trade. The grinding materials are ores, organic & inorganic
chemistry, medicine, plastic and fibre materials.
|
Principle:
 The
feed in the screw feeder passes through the hopper into the chamber
of the machine and is ground by the eddy air current in the channel
of toothed-plate produced by the swinging hammers surrounding a
horizontal shaft (that is revolving at high speed). The direction
of the eddy air current is opposite to that of the main eddy air
current formed by rotor. The particles in the feed bombard one another.
At the same time, the particles are submitted to the bombardment
with hammers and the shearing force in the narrow openings between
the tips of the hammers and toothed-plate. A small part of particles
that survived the hammers are ground by the eddy air current produced
by the upper and the lower gear plates. At last the fine particles
are discharged through the screens.
Main uses:
It is designed for treating material of hardness
about 3 in Mohs'scale, including soft, ores and brittle, flexible
and fibrous materials. It can break down caking substances.
Applications:
All chemicals, dyestuffs, pigmentys, coatings, building
materials, pesticide, fertilizer, marine products, medicine, medicine
herbs, fodder, leather, papermaking, carbon black, noble metals,
sanitary materials and perfumes.
Characteristics of the machine:
1. JCW300-I hammer type machinery mill is equipped
with water supply system to lower the temperature of the inner chamber.
2. It is equipped with a set of screens for customer's selection
to obtain different sizes of the products and also equipped with
a set of stripped screens for selecting Different air flow rate
and air pressure so as to obtain the desired fineness of the product.
3. It is equipped with combination machine. Less area occupied,
Convenient for operation. |
